Woven cane and rattan are natural materials that add warmth and texture — particularly central to the Harbour Living range. Both materials age beautifully with the right care, but can become brittle or mouldy without it.
Understanding the materials
Rattan is a climbing palm. The pole is used for furniture frames; the peel (the outer layer) is used for weaving. Both are flexible and durable when maintained.
Cane refers to the woven strips, typically from rattan. Cane webbing (the classic hexagonal weave pattern) is one of the most recognisable uses.
Seagrass, water hyacinth, and bamboo are related natural weave materials that follow similar care principles.
Moisture and rattan
Rattan does not like prolonged moisture. In humid or damp conditions without good air circulation, mould can develop in the weave. However, occasional moisture is fine and can actually help prevent the material from drying out and cracking.
The key rule: rattan can get wet but must dry thoroughly. Avoid leaving rattan furniture in standing water or in enclosed, humid spaces without ventilation.
Cleaning
Regular care: - Dust weekly with a soft brush or dry cloth. - Vacuum crevices in the weave with a brush attachment.
Deeper cleaning: 1. Mix a small amount of mild soap in warm water. 2. Dampen a cloth (do not soak) and wipe over the surface. 3. Use a soft brush to work into the weave pattern where needed. 4. Wipe down with a clean damp cloth to remove soap residue. 5. Dry thoroughly — leave in a well-ventilated space or outdoors (in shade) until completely dry.
Preventing brittleness
Natural rattan and cane can dry out and become brittle, especially in air-conditioned environments. If the material starts to feel dry, apply a thin coat of linseed oil or a rattan-specific conditioner with a cloth. This replenishes the natural flexibility of the fibres.
Indoor vs outdoor use
Most Harbour Living rattan and cane pieces are designed for indoor or covered outdoor use. Prolonged exposure to rain and direct UV will degrade natural rattan over time — the fibres dry and crack, and the finish deteriorates.
For fully outdoor use, look for pieces made with HDPE (synthetic) wicker — this is designed for exposure and will not degrade the same way natural rattan does.
Mould
If mould develops: 1. Take the piece outside. 2. Apply a solution of 1 part white vinegar to 4 parts water with a brush. 3. Leave for 15 minutes, then scrub gently and rinse with clean water. 4. Dry thoroughly in a well-ventilated space.
Related articles
- Outdoor furniture care by material
- Harbour Living aesthetic guide
- Style guide: Coastal