Metal finishes — brass, matte black, brushed steel — add refinement to furniture and lighting. Each has its own care needs, and the key distinction is whether the metal is lacquered (coated for protection) or unlacquered (raw finish that patinas over time).
Brushed brass and gold tones
Lacquered brass
Most furniture brass is lacquered to maintain a consistent finish.
Care: - Wipe with a soft, damp cloth and mild soap. Dry immediately. - Avoid abrasive cleaners, polishes, and harsh chemicals — they strip the lacquer. - Do not use brass polish on lacquered brass — it removes the protective coating.
If the lacquer wears off: the exposed area will tarnish at a different rate to the lacquered sections, creating an uneven look. Have it professionally re-lacquered, or accept the transition to a natural patina.
Unlacquered brass
Some decorative pieces use unlacquered brass, which develops a natural patina over time — a living finish that darkens and deepens with age and handling.
Care: - Clean with mild soap and water; dry thoroughly. - To polish (if you prefer to maintain brightness): use a dedicated brass polish applied with a soft cloth. - To encourage patina: leave alone — the natural oils from handling and air exposure do the work.
Matte black
Matte black finishes (most commonly powdercoated steel or aluminium) are popular on Northfield Interiors frames and legs.
Care: - Wipe with a damp cloth only — no abrasive cleaners or harsh chemicals. - Dry after wiping to prevent water spots. - Avoid steel wool or abrasive pads — they will scratch the matte surface and leave shiny marks.
Fingerprints: matte black shows fingerprints. A microfibre cloth (slightly damp) is the best removal tool — it lifts the oil without smearing.
Brushed nickel and stainless steel
Care: - Wipe with the grain direction (the brushed lines) using a damp microfibre cloth. - For water spots: a small amount of white vinegar on a cloth, wipe in the grain direction, then dry. - Avoid bleach and chloride-based cleaners — they cause pitting.
Chrome
Chrome is most common on older designs but less prevalent in current ranges.
Care: - Wipe with a damp cloth; dry immediately to prevent water spots. - Glass cleaner works well for a streak-free shine. - A thin coat of car wax can help protect against future water spotting.
Rust
Solid steel (not coated or stainless) can develop rust. If rust spots appear: - Sand lightly with fine sandpaper; prime and repaint with a metal paint. - For outdoor steel, rust indicates the coating is compromised — address promptly.
Related articles
- Lighting care
- Northfield Interiors aesthetic guide
- Outdoor furniture care by material