Engineered timber — most commonly engineered oak — is used across Northfield Interiors' dining tables, shelving, desks, and bed frames. It combines the natural look of real oak with superior dimensional stability, making it better suited than solid timber to Australia's variable climate conditions.
What engineered timber is
Engineered timber is made from real wood — typically a layer of solid oak veneer (2–6 mm thick) bonded over a stable core of cross-laminated layers. The visible surface is genuine oak grain; the engineered core resists the expansion and contraction that causes solid timber to warp and split with humidity changes.
The key implication: the surface is real timber and should be treated as such, but it cannot be sanded or refinished as deeply as solid timber. The veneer layer is thinner, so aggressive sanding removes it.
Daily care
- Wipe down with a soft, slightly damp cloth (no soaking). Follow the grain direction.
- Dry immediately after cleaning — do not leave moisture sitting on the surface.
- Use coasters and trivets for cups, plates, and hot items.
- Use felt pads under decorative objects to prevent scratches.
Cleaning products
- Use: mild dish soap diluted in water; dedicated wood furniture cleaner.
- Avoid: abrasive cleaners, bleach, ammonia-based products, spray polishes containing silicone, and steam cleaners.
- Silicone-based polishes can build up and cloud the finish over time.
Re-oiling and refinishing
Most Northfield engineered timber pieces have a factory-applied clear coat or hardwax oil finish that does not require periodic re-oiling under normal care conditions.
If the surface begins to look dry or loses its sheen after several years: - Use a hardwax oil specifically formulated for finished timber (not a penetrating raw-wood oil). - Apply sparingly with a cloth, following the grain. - Do not sand between coats unless specifically recommended for your product.
Do not sand aggressively — you risk breaking through the veneer.
Scratches and marks
Light surface scratches can be minimised with a matching furniture touch-up marker or a small amount of hardwax oil worked into the mark. Deep scratches that penetrate the veneer are difficult to repair at home and may need professional attention.
Climate stability
Engineered timber performs better than solid timber in variable humidity, but it still benefits from moderate conditions (relative humidity 40–60%). Avoid direct heat sources and strong direct sunlight on any unprotected timber surface.
Related articles
- Solid timber care
- Northfield Interiors aesthetic guide
- Glass table top care