Solid timber furniture is built to last generations. It's also a natural material that responds to its environment — temperature, humidity, and how you maintain it all affect how it ages. Treat it well and it gets better over time.
Understanding your timber finish
Most solid timber furniture has one of these finishes:
- Oiled: the timber is treated with oil that penetrates the surface. It has a natural, matte look and feels like wood. Needs periodic re-oiling.
- Lacquered / sealed: a clear or tinted coat sits on top of the timber. More protective against spills but less repairable if scratched.
- Waxed: similar to oiled in look; needs periodic re-waxing.
If you're unsure of your finish, check your product documentation or contact us.
Daily care
- Dust regularly with a slightly damp cloth or microfibre cloth. Follow the grain.
- Clean spills immediately — solid timber can absorb moisture and swell or stain if left wet.
- Use coasters and trivets under hot items, cups, and glasses. Even sealed timber can be marked by heat and moisture.
- Use felt pads under decorative objects and ceramics to prevent surface scratches.
Oiled timber: re-oiling schedule
Oiled timber should be re-oiled every 6–12 months (more frequently if the surface starts to look dry or dull). Harbour Living's bleached and natural timber pieces typically use an oil finish.
To re-oil: 1. Clean the surface and allow it to dry fully. 2. Apply a thin coat of the recommended timber oil (use the oil specified for your piece — different timbers suit different oils). 3. Work in the direction of the grain using a clean cloth. 4. Allow to penetrate for 15–20 minutes, then wipe off any excess. 5. Allow to cure for 24 hours before normal use.
Humidity and temperature
Timber expands in humidity and contracts in dry conditions. In climate-controlled rooms: - Aim for relative humidity between 40–60%. - Avoid placing timber furniture directly next to heating or cooling vents, fireplaces, or air conditioning units. - Sudden temperature changes (e.g. an outdoor piece moved into an air-conditioned room) can cause cracking.
Removing minor scratches
Light surface scratches on oiled timber: apply a small amount of matching timber oil to the scratch and work it in. For oiled pieces, light sanding (180 grit, with the grain) followed by re-oiling can remove minor surface marks.
On lacquered surfaces: light scratches are harder to repair at home. A furniture touch-up marker in a matching colour can minimise the appearance. Deep scratches may need professional attention.
Related articles
- Engineered timber care
- Marble and stone care
- Harbour Living aesthetic guide