Marble and natural stone are some of the most beautiful materials in furniture — and some of the most misunderstood. With the right approach, they're perfectly liveable. Without it, they stain and etch quickly.
Understand what marble is
Marble is a metamorphic rock — calcium carbonate that reacts chemically with acids. This is the core fact you need to know. Anything acidic — coffee, wine, lemon juice, vinegar, soft drinks — will etch marble on contact, leaving dull marks even if wiped away immediately.
Travertine and limestone behave the same way. Granite is significantly more resistant.
Sealing
Natural stone should be sealed before use and re-sealed periodically. A quality penetrating sealer slows liquid absorption but does not make stone impervious — act on spills immediately regardless.
To test whether sealing is needed: drop a small amount of water on the surface. If it beads, the seal is still effective. If it absorbs within a few minutes, it's time to re-seal.
Re-seal every 12 months for a dining table; every 18–24 months for a lower-use coffee table.
Daily care
- Wipe with a soft cloth and warm water for everyday cleaning.
- Dry immediately after wiping — pooled water can leave marks on some stones.
- Use coasters under all drinks — not just wine and coffee, but water too.
- Use trivets under any warm or hot items.
- Use placemats on stone dining tables.
Cleaning products
- Use: pH-neutral stone cleaner or very mild dish soap in water.
- Avoid: vinegar (acid), citrus-based cleaners, bleach, ammonia, abrasive pads or powders.
Even "natural" cleaners like lemon juice or white vinegar will etch marble. Read ingredient labels.
Spills
Blot immediately — do not wipe. Wiping spreads the liquid; blotting absorbs it.
- Acidic spills (coffee, wine, citrus): blot immediately, rinse with plain water, blot dry. There may still be a slight etch mark — this is surface dulling, not a stain.
- Oil-based spills: blot, then apply a poultice (cornflour or a commercial stone poultice) to draw out the oil.
Etching vs staining
Etching is chemical damage to the surface — a dull patch caused by acid contact. It's not a stain (the material isn't discoloured — the polish is dulled). Light etching can be buffed out with a marble polishing powder; deeper etching needs professional honing.
Staining is a substance absorbed into the stone. It typically requires a poultice treatment.
Related articles
- Glass table top care
- Solid timber care
- Northfield Interiors aesthetic guide