Lights accumulate dust quickly — especially pendants and lampshades, where warm air rises and deposits fine particles. Regular maintenance keeps them bright and extends their life.

Safety first

Always turn off and unplug a lamp — or switch off the circuit — before cleaning any light fitting. Allow globes to cool for at least 5–10 minutes before touching them; hot globes can cause burns and may crack if touched while hot.

Cleaning by shade type

Fabric and linen shades

  • Dust weekly with a soft brush attachment on a vacuum at low suction, or a lint roller.
  • For deeper cleaning: a barely damp white cloth, gently blotted (not rubbed) over the surface. Allow to dry completely before switching on.
  • Do not submerge fabric shades in water — the frame can rust and the fabric can shrink or distort.

Rattan and woven shades

  • Dust with a soft brush or compressed air.
  • For deeper cleaning: a barely damp cloth and mild soap solution, wiped across the weave. Dry thoroughly before use.
  • See Woven cane and rattan care for more detail.

Glass shades and pendants

  • Wipe with a damp microfibre cloth and glass cleaner.
  • Dry with a lint-free cloth for a streak-free finish.

Metal lamp bases (brass, matte black, steel)

  • See Brass and metal finish care for specific guidance.

Globes and bulbs

Bulb type compatibility: Always match the bulb type to the fitting:

  • Check the wattage maximum marked on the fitting. Exceeding it creates a fire risk.
  • Most modern fittings use E27 (large Edison screw), E14 (small Edison screw), or GU10 (bayonet/twist-lock) bases. Check before buying a replacement.
  • Use LED globes wherever possible — they run cooler, use significantly less energy, and last much longer than halogen or incandescent options.
  • For warm, ambient light, choose 2700–3000K colour temperature.

Changing a globe: 1. Turn off and allow to cool. 2. For screw-base globes: turn anticlockwise to remove. 3. For bayonet globes (B22): push in, turn anticlockwise, and pull out. 4. Insert the replacement and test.

Cords and cables

  • Inspect cords periodically for signs of damage (fraying, cracking, kinks). Do not use damaged cords.
  • Do not run cords under rugs or through doorways — this can damage insulation.
  • For pendant lights with adjustable cord, check that the cord grip at the canopy is secure.

Related articles

  • Lighting layers explained
  • How to choose a pendant light for a dining table
  • Brass and metal finish care